The HOBBY 1000 is a very quiet small machine for startups, textile shops cleaning up to 25 screens per day or graphic shops cleaning 5 screens per day. The Hobby I 000 has a fully rebuildable 3 piston pump and motor unit. The machine comes standard with 23' of high pressure hose, trigger gun control and our unique fully adjustable vario nozzle. The nozzle adjusts from high to low pressure and allows you to change the width of the spray pattern with a simple twist of the nozzle. The power cord is fitted with a ground fault circuit interrupter for safety.

The SUPER 5500 is a medium duty machine for shops who's cleaning needs are increasing or need to replace an old pump. Ideal for a wide variety of screenprint shops especially textile printers with volume up to 75 average size frames per day. The quiet Super 5500 has a fully rebuildable 3 piston pump and motor unit. The machine comes standard with 33' of high pressure hose, quick release trigger gun with built in swivel and dual wand with adjustable pressure and flood rinse nozzle. The power cord is fitted with a ground fault circuit interrupter for safety.

The 30CA series of medium duty machines are ideal when performance and cleaning power are needed. Both models feature fully rebuildable 3 piston pump motor units and our exclusive autostart/stop/restart feature.* just squeeze the trigger of the spray gun and the motor-pump starts up, let go of the trigger and themotor-pump turns off. This feature eliminates machine run on, and premature valve and seal damage commonly found with other high pressure pumps. The 30CA- 110 is ideal for shops cleaning up to 75 average size textile frames per day. The increased performance of the 30CA-220 lets you clean faster with less chemicals and can be used for up to 125 average textile frames or 25 graphic frames per day. Both models come with the same hose, gun, wand and ground fault circuit interrupter as listed with the Super 5500.

 

Model	Hobby 1000	Super 5500	30CA- 110	30CA-220
Pump Pressure (Psi)	1020	1225	1225	2175
Max. Water Volume (gpm)	2.5	2.5	1.8	2.3
Max. inlet Temp. ('F).	140-	140'	145-	1450
Motor (HP)	1.5	1.7	1.8	3
Power Required (V/A)	110 V/15A	110V/15A	115V/15A	220V/1 2A
Max. pressure of inlet water (Psi)	125	125	125	125
Detergent dosage (%)	-	0-5	0-5	0-5
Electrical caldle, length (ft.)	25	16	25	25
High pressure hose, length (ft.)	23	33	33	33
Size L x W x H (in.)	1 0 x 16 x 8	26 x 15 x 13	15 x 15 x 40	15 x 15 x 40
Shipping Weight (lb.)	45	82	84	84

The 40CA series of machines are great mid level screen cleaners.With four different pressure ranges and three different voltages there is a machine just right for each shop size.The 40CA has a low maintenance fully rebuildable pump motor unit.The pump is sealed so you never have to add oil. The advanced pump design uses reinforced seals and aluminum oxide ceramic pistons. Our exclusive Auto Start/Stop/Restart System* and quick release trigger gun with swivel, dual wand with flood rinse nozzle are standard on all four models. Available in 110V, 220V and 30220V or 440V. Choose one of these models for cleaning volumes between 50-200 average size textile frames per day.The larger models are also ideal for large format printers.The increased pressure and volumes makes cleaning larger format screens quick and easy.

The C3KA series machines are the toughest available in the screen industry.These machines are for high volume and large format printers who need to get it done quickly and efficiently.The C3KA heavy duty 4 piston pump uses special aluminum oxide ceramic pistons, stainless steel valves and reinforced double seals.These pumps are designed to operate continuously in a multiple shift operation. Each model has our exclusive Auto Start/Stop/Restart System* with adjustable pressure at the pump and the dual wand. Comes complete with up to 25' of heavy duty high pressure hose, quick release trigger gun with swivel, dual wand with adjustable pressure and flood rinse nozzle and 16' of electrical cord.

  

MODEL		0940CA	2040CA	2540CA	3340CA	4OC3KA	S2C3KA
Pump Pressure PSI'		1000	1700	2100	2500	2200	2600
Max.WaterVolume gpm		2.5	3.3	3.7	4.1	5.0	5.5
Max. inlet Temp. -F.		1400	140'	1400	140'	140'	1400
Self-priming lift ft.		0	0	0	0	0	0
Motor (TEFC) HP		1.9	3.5	4	5.6	7.3	8.8
Power Required V/A/Ph		115/20/1	220/18/1	220/21/1	220 or 440/18/3	220/30/1	220/25/3 or 440
Size L xW x H in.		17 x 17 x 38	17 x 17 x 38	17 x 17 x 38	17 x 17 x 38	41 x 20 x 33	41 x 20 x 33
ShippingWeight lb	.	125	125	125	125	200	200

 NOTE: Due to the high performance nature of all of our screen cleaners we recommend the installation of a cartridge inlet water filter assembly Part Number PSCL-RSO to protect both the pump and your screens from contaminated water. See page I / for details

AUTOMATIC START/STOP FEATURE: When the trigger gun is pulled the pump starts automatically. Releasing the trigger lets the pump idle for 20 seconds, then stop completely until you pull the trigger again to restart the pump. This feature greatly reduces wear of the pump

 

Please contact our Webmaster with questions or comments.
© Copyright 2002-2006 Technical Service and Supply, Inc. All rights reserved.