The PREMIER Series UV curing units are recommended for high speed curing applications.

The UV curing unit is a combination of UV cure and Ambient cooling all within one 12' chamber. I or 2 separately controlled UV curing lamps, capable of operating at 200/300 Watts per Inch. Each are located under a focused reflector, each powered by a controlled power supply.

A self contained water recirculating system is built-in. This provides a safe and effective cooling of the UV reflector, keeping operation at maximum output without excess heat buildup on printed substrate.

A series of ambient cooling boxes, supplied by a high efficiency cooler blower are located inside the chamber and are adjustable from I " to 3" off conveyor be[LThis allows to impinge high velocity ambient air on to moving substrate.

The conveyor system is a modular rail with belt supports and supplied with a fiberglass Teflon coated conveyor belt, driven by a 1/2 H.P SCR DC drive motor.

Conveyor speed is adjustable from S to 120 ERM.

The control panel provides functions for all operations of the Premier reactor, including the digital conveyor speed indicator and independent blowers and exhaust controls.

Specifications:

  • S'- 0" Feed In Conveyor
  • 12 - 0" U.V. Chamber
  • 3' - 0" Run Out Conveyor
  • 20' - 0" Overall Length
  • SO" Overall Height
  • Available from 30" to 72"Wide Conveyor Belts
  • 208/230VAC

Optional Features

  • Additional feed in and run out conveyors.
  • 50 Degree F refrigerated air conditioning.
  • 380/460/550 VAC.
  • SO or 60 Hertz.
  • Tri-Power 12S/200/300 Watts per inch.
  • Vacuum hold down throughout conveyor.
  • Moveable lnfra Red pre-heat section.
  • Metal Halide curing lamps.

Standard Features

  • Available in I or 2 lamps
  • Focused water cooled lamp assembly with standard 200/30OWPI
  • Full featured control panel
  • Digital EP.M. indicator and hour meter
  • Heavy duty exhaust blower for sheet hold down, contaminant removal.
  • Slide out tray for easy access to lamp assembly
  • Vacuum hold down under cooling section.
  • D.C. Conveyor drive.

 

Safety Features

  • Access safety circuit prevents unit from being turned on with panels open.
  • Water safety circuit prevents startup without water.
  • Ground fault safety circuit automatically shuts down when main ballast goes to ground.
  • Exhaust safety circuit prevents start up when exhaust is off.
  • Emergency stop buttons.
  • Belt interlock prevents start up with conveyor belt off.

 

 

UV Premier Series

Please contact our Webmaster with questions or comments.
© Copyright 2002-2006 Technical Service and Supply, Inc. All rights reserved.